Our Machines
VF-840 VF-840
| X Axis | 1626mm |
| Y Axis | 1016mm |
| Z Axis | 762mm |
VF-4SS VF-4SS
| X Axis | 1270mm |
| Y Axis | 508mm |
| Z Axis | 635mm |
VF-4S VF-4S
| X Axis | 1270mm |
| Y Axis | 508mm |
| Z Axis | 635mm |
UMC-750SS UMC-750SS
| X Axis | 750mm |
| Y Axis | 510mm |
| Z Axis | 600mm |
UMC-750 UMC-750
| X Axis | 750mm |
| Y Axis | 510mm |
| Z Axis | 600mm |
SV2060-2 SV2060-2
| X Axis | 2600mm |
| Y Axis | 1030mm |
| Z Axis | 815mm |
ST-30 ST-30
| X Axis | 600mm |
| Y Axis | 300mm |
| Z Axis |
JINN FA JSL-20AB JINN FA JSL-20AB
Up to Diameter 20
GENOS-M560R GENOS-M560R
| X Axis | 1050mm |
| Y Axis | 560mm |
| Z Axis | 460mm |
DOOSAN-750L DOOSAN-750L
| X Axis | 2160mm |
| Y Axis | 762mm |
| Z Axis | 650mm |
DMG MORI-M1 DMG MORI-M1
| X Axis | 600mm |
| Y Axis | 400mm |
| Z Axis |
20SSY 20SSY
| X Axis | 400mm |
| Y Axis | 250mm |
| Z Axis |
VF-2 VF-2
Machine from HAAS Recorded in October 2021 Production capacity for small and serial parts with high precision capability.
| X Axis | 762mm |
| Y Axis | 406mm |
| Z Axis | 508mm |
SV-2600 SV-2600
Machine from AKIRA SEIKI Recorded in October 2021 Production capacity for small and serial parts with high precision capability.
| X Axis | 2600mm |
| Y Axis | 1030mm |
| Z Axis | 810mm |
DMU-50 DMU-50
Machine by DMG-MORI Acquired and will be setup A.H in July 2022 High-precision five-axis machine. Has an EROWA automation system for replacing parts by a robot and thus receiving high product quality.
| X Axis | 500mm |
| Y Axis | 450mm |
| Z Axis | 400mm |
DA-300 DA-300
By MAKINO JAPAN Acquired and to be setup by A.H. Metals in July 2022 High-precision five-axis machine. Has an EROWA automation system for replacing parts by a robot and thus receiving high product quality.
| X Axis | 500mm |
| Y Axis | 450mm |
| Z Axis | 400mm |
JSL-20AB3 JSL-20AB3
SWISS-TYPE by JINIFA machine Recorded in July 2022 Automatic milling lathe for the production of large volumes of parts with high accuracy and agileness.
Global-S Global-S
And of course, we didn't forget that the parts need to be checked. So, we took care of the XYZ automatic test machine from hexagon
| X Axis | 1000mm |
| Y Axis | 1500mm |
| Z Axis | 1000mm |
- In all 3-axis machines, there is a production capacity for 4-axis as well.
- The factory has knee-based production technology, in very large parts that require milling on the sides of the part.
- Automatic tool closure machine EASY LOCK
- For the prevention of fractures, and production failures and high accuracy in production.
- SHRINK system from ISCAR To close tools with high heat to prevent the throwing of the tool in production.